Technical Details
1, The Mark IV Industrial TrimMaster
The Mark IV Industrial TrimMaster®, featuring new POWERslot™ technology, provides single user setup and operation in the shop and on the job site. Non-marring vinyl strips protect clad finishes leaving clean crisp bend lines and hems. Our unique cam-locking system clamps to the thickness of the material and not to a factory preset. Should you ever need to fine-tune your brake, each casting comes with independently adjustable UHMW plastic wedges. While some brake manufacturers have taken away your ability to make these adjustments, its nice to know TrimMaster® gives you the choice, even if you never have to use it.
Features:
- Heavy-duty extruded aluminum shop stand included with every Mark IV. The Xtreme™ Shop Stand will not rock, rattle, roll or rust. Unit is fully detachable and collapsible for easy fast setup and transport.
- Hollow-core fixed hinge, bending hinge and base rail design makes this one tough brake. New FTA system (Fine-Tune Adjustment), means you still have control over adjusting your machine, though you may never need to.
- Mark IV Industrial TrimMaster has the strongest bending capacities you can get in a portable brake.
- Unique Cam-Locking system locks to the thickness of the material
- Full loop locking and bending handles are ergonomic and provide for single operator use.
- Heavy-duty hinge provides years of dependable service without material curling at the ends or sags in the center.
- Mark IV Industrial works with TrimCutter™ for quick clean material cutting right on the brake. TrimCutter™ does not ride off the brake during cut.
Utilization:
- Commercial Roofing and Siding
- Heating/Air Conditioning (HVAC)
- Patio Enclosures
- Emergency Repair Crews
- Sheet Metal Workers
- Commercial Kitchens/Ducts
- Solar Energy Panel Installers
- Automotive Sheet Metal Shops
- Property Management Crews
- Glazers and Sign Makers
Technical details:
| MARK IV INDUSTRIAL | |||||||
|---|---|---|---|---|---|---|---|
| Model | IT 663 | IT 863 | IT 1063 | IT 1263 | IT 1463 | ||
| Length (m) | 1,98 | 2,59 | 3,20 | 3,80 | 4,40 | ||
| Weight (kg) | 54,00 | 67,10 | 79,80 | 93,40 | 106,60 | ||
| Castings (pcs) | 7 | 9 | 11 | 13 | 15 | ||
| Ord. Code | 14.20 | 14.21 | 14.22 | 14.23 | 14.24 | ||
Note: Unistand Extreme is already included in the price for machine, other accessories are not included
| Accessories to MARK IV INDUSTRIAL | |||
|---|---|---|---|
| 3004 Wheel Kits | 3006 Shelf Brackets | 3017 TrimCutter | |
| 3015 TrimFormer | 3942 Tune-Up Kit | ||
| Bending Capacity (mm) | |||
|---|---|---|---|
| Al 1,2 | Cu 0,8 | TiZn 1,2 | FeZn 0,8 |
| Stainless 0,7 | |||
2, Mark II TrimMaster Contractor + Commercial
The Mark II TrimMaster® arrives with leading technologies such as the POWERslot™, easier bending, making smaller “J” channels and hollow core hinge extrusions for added strength. The manufacturer also left you the ability to make fine-tune adjustments to this brake, though you may never have to. Ultra High Molecular Weight (UHMW), wedges are independently adjustable and replaceable should the occasion ever arise. After all, we believe a Van Mark brake is the closest thing to a “non-adjustment” brake you'll find out there.
Features:
Arcuate Hinge Design/Thick Hollow-Core Extrusions
Handle Plugs Do Not Hit Ladder Rack
Non-Marring Vinyl Strips
Computer Designed Components
Full length Key Way
Aircraft Grade Aluminum Castings
Patented Cam Locking System
Double Journals/Thermoplastic Bearings
Independently Adjustable Wedges
-
Mark II TrimMaster Contractor
| MODEL MARK II CONTRACTOR | |||||||
|---|---|---|---|---|---|---|---|
| Model | TM 260 | TM 460 | TM 660 | TM 860 | TM 1060 | TM 1260 | TM 1460 |
| Length (m) | 0,60 | 1,40 | 1,98 | 2,59 | 3,20 | 3,80 | 4,40 |
| Weight (kg) | 14,50 | 26,30 | 32,70 | 42,30 | 51,80 | 63,20 | 73,20 |
| Castings (pcs) | 2 | 3 | 3 | 4 | 5 | 6 | 7 |
| Ord. Code | 14.50 | 14.51 | 14.52 | 14.53 | 14.54 | 14.55 | 14.56 |
Note: Neither Unistand Extreme nor other accessories are included in the price of the machine.
| Accessories to MARK II CONTRACTOR | |||
|---|---|---|---|
| 3021 Unistand | 3004 Wheel Kits | 3006 Shelf Brackets | |
| 3017 TrimCutter | 3015 TrimFormer | 3157 Tune-Up Kit | |
| Bending Capacity (mm) | |||
|---|---|---|---|
| Al 1,0 | Cu 0,6 | TiZn 1,0 | FeZn 0,6 |
| Stainless 0,5 | |||
-
Mark II TrimMaster Commercial
The Mark II TrimMaster® Commercial brake has additional “C” castings to handle medium grade metals with ease. Like the Contractor, the Commercial model provides all the bending power needed without sacrificing one of the most important features in a job site brake, portability!
| MODEL MARK II COMMERCIAL | |||||||
|---|---|---|---|---|---|---|---|
| Model | TM 661 | TM 861 | TM 1061 | TM 1261 | TM 1461 | ||
| Length (m) | 1,98 | 2,59 | 3,20 | 3,80 | 4,40 | ||
| Weight (kg) | 38,60 | 51,80 | 64,50 | 78,20 | 91,40 | ||
| Castings (pcs) | 5 | 7 | 9 | 11 | 13 | ||
| Ord. Code | 14.60 | 14.61 | 14.62 | 14.63 | 14.64 | ||
Note: Neither Unistand Extreme nor other accessories are included in the price of the machine.
| Accessories to MARK II COMMERCIAL | |||
|---|---|---|---|
| 3021 Unistand | 3004 Wheel Kits | 3006 Shelf Brackets | |
| 3017 TrimCutter | 3015 TrimFormer | 3967 Tune-Up Kit | |
| Bending Capacity (mm) | |||
|---|---|---|---|
| Al 1,1 | Cu 0,7 | TiZn 1,1 | FeZn 0,7 |
| Stainless 0,6 | |||
3, Industrial Slitter Combo
Industrial Slitter Combo™ is the newest addition to a long and successful lineup of portable slitters. Designed to handle most sheet metals used in commercial roofing and siding, this tool allows for easy single user operation from start to finish. From the built-in feed table to the multiple roller exit table, the user friendly features will save you time and money not only on the job-site, but in your shop as well.
- Unit comes complete with multiple roller exit table.
- 115 volt, high torque motor package.
- UniStand™ universal brake, slitter and saw table stand.
- 2 sets of slitting knives (used also for rib forming).
- Heavy-duty slitter base.
Features:
Cuts commercial metals on the job.
Leaves a factory-quality edge.
Does not harm factory finishes.
Fully adjustable knives/booster blocks.
Double-edge knives can be flipped over to use other edge
Accessories - TrimCutter & TrimFormer
| Al 1,2 mm | Cu 0,8 mm | TiZn 1,2 mm | FeZn 0,8mm | Stainless 0,7 mm |
TrimFormer – gives you the ability to strengthen and beautify ordinary trim work into designs that will distinguish your workmanship from all others. You can perform three kind of profiles with TrimFormer using easily variable system molding dies. Section is mainly suitable for both longitudinal hardening of metal sheet against the bending and aesthetic element. TrimFormer is suitable for all types of brakes Van Mark line Mark II and MARK IV.
Accessories - Unistand Adjustable and UniLeg for machines VanMark - line Mark II
UniStand Adjustable™ features a 4-point adjustable leg system designed to give complete control over tool height and position with 6 height adjustments. The Unistand is built from durable steel. It allows easy maneuverability and will not sink into lawns.
UniLeg sets up fast and easy and with its unique leg flare-out design, you can rest assured your Van Mark tool in on stable footing. Unileg has all-steel welded construction, durable powder-coat finish. UniLeg™ does not rack-rattle-roll and no tool are needed - single user setup.
Tune-Up Kits
As our company ensures central stock of the manufacturer for Europe, we have got all spare parts and tune-up kits for all types of machines permanently on the stock available.
We would like to thank all participants whose joint product training in Rohlenka on 01.04.2011
Do you want to become our new business partner?
Visit us on our stand at the International Building Fair IBF in Brno!